Amica KMI 13298 C EN Manual de usuario descargar pdf (Pagina 15)

OPERATION

Control Panel

● Immediately after the appliance is connected to electrical mains, all displays will light up

briey. Your induction hob is then ready for use.

● The induction hob is equipped with electronic touch control sensor elds, which are

operated by touching with a nger for at least 1 second.

● Touching of a sensor eld is accompanied by an acoustic signal to acknowledge.

No objects should be placed on the sensor elds (this could cause an error).

Touch sensor elds should be always kept clean.

Selecting the cooking zone heat setting

When the cooking zone display (3) shows bright “0”, start setting the desired heat setting

using the „+” (2) or „-” (2) sensor eld.

If none of the sensor elds is touched within 60 seconds of switching on the

appliance, the cooking zone switches off.

A cooking zone is active when its display shows a digit or a letter. This indicates the

cooking zone is ready for the heat setting to be set or changed.

Switching on the cooking zones

Once the appliance is switched on using the on/off sensor eld (4), select a cooking zone (1)

within the next 60 seconds.

1. When a cooking zone selection sensor eld (1) is touched, „5” on the corresponding heat

setting indicator display will become bright.

2. Set the desired heat setting using the „+” (2) or „-” (2) sensor elds.

Switching on the appliance

To switch on the appliance touch and hold the on/off sensor eld (4) for at least 1 second.

The appliance is switched on when all displays show „-” or „--”.

If none of the sensor elds is touched within 60 seconds, the appliance switches

itself off.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sin comentarios

Amica KMI 13298 C EN Manual de usuario Pagina 15