Amica PH6400Z Manual de instrucciones

PB*4VQ247CFIOAA-646(10.2014/1)OPERATING MANUAL

10INSTALLATIONDo not install the hob above the oven without ventilation.Route electrical lead so that it does not touch the lower guard.Installing hob

11 Installation of PB*4VQ247CF plate INSTALLATION• Use four “A” brackets for 38 mm thick worktops. Fit the hob into worktop opening as shown on gu

12Fix the mains connection cable in a stay wireINSTALLATION Before connecting the plate to the electric system read information provided on the rating

13OPERATION INSTALLATIONBefore rst use ● carefully clean the ceramic plate treating it as a glass surface,● when used for the rst time the plate

14OPERATION When switching the plate on and off and setting the heating power always touch only one sensor. If you touch several sensors at

15OPERATION Switching on the induction hobWhen the induction hob is switched off then all the cooking zones are disconnected and the indicators are of

16OPERATION Selecting a cooking zoneTouching the cooking zone selection sensor eld (2) activates the individual cooking zo-nes. A cooking zone is ac

17OPERATIONCooking heating power settingFast cooking time (min)1 12 33 4,84 6,55 8,56 2,57 3,58 4,59 -Switching off selected cooking zoneSelected cook

18OPERATIONResidual temperature indicatorWhen a hot plate has been switched off, letter “H” is displayed indicating that the hotplate is still hot. Do

19OPERATIONThe child lock function The child lock function protects the induction hob from being accidentally switched on by children, pets, etc. Sw

2DEAR USER, Caution! Operate the appliance only after reading / understanding this Manual. The appliance has been designed only for cooking. Any othe

20Daily cleaning and proper maintenance have crucial impact on the durability of your ceramic plate. ● Wipe off slight, not-burnt patches of di

21CLEANING AND ROUTINE MAINTENANCE Never apply cleaning agent on a hot hotplate. Leave the cleaning agent to dry and then wipe it off with a we

22EMERGENCY PROCEDURESEvery time when emergency situation occurs you should:• switch off the working assemblies of the plate• disconnect power suppl

23EMERGENCY PROCEDURESPROBLEM CAUSE ACTION7.Residual temperature in di-ca tor is not lighted although the hot pla tes are still hot- power supply f

24TECHNICAL DATARated voltage: 400V 2N~50 HzRated power: PB*4VQ247CF- hotplate: 2 x Ø 145 mm 1200 W- hotplate: 1 x Ø 180 mm 1800 W- hotplate: 1 x Ø 21

25

26

27

3TABLE OF CONTENTSBasic information...2 Safety instruct

4SAFETY INSTRUCTIONSWarning: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heatin

5SAFETY INSTRUCTIONSWarning: If the surface is cracked, switch off the ap-pliance to avoid the possibillity of electric shock.The appliance is not int

6SAFETY INSTRUCTIONS● Do not use plastic pots or containers made from aluminium foil as they melt in high temperatures and may damage the ce

7When disposing of the de vice, do not bring it to regular mu nici-pal waste containers. Instead, bring it to electrical and elec-tronic w

8DESCRIPTION OF THE APPLIANCE Description of PB*4VQ247CF induction hobTouch control sensor panel1. On/off sensor2. Cooking zone selector sensor,3.

9Making the worktop recessINSTALLATION• Worktop thickness should be 28 - 40 mm, while its width at least 600 mm. The worktop must be at and level. E